Product

Product Environment Instrumentation Equipment

D type moisture remover for chimney

NDD-C1030

NDDC 1030 is the pre-processing equipment for moisture removal that is used together with the installation of the NDIR multi-gas instrument for TMS chimney. The moisture is the most sensitive element from the measurement course of the NDIR multi-gas instrument. The moisture existing on the gas specimen stimulates the interference reaction on the instrumentation of the target gas to be measured to work as a factor to interfere with the precision of the NDIR multi-gas instrument. The special design structure that applied the MpEMbA effects and drastic cooling into the extremely cold environment of minus 30 degree helps removing the moisture in the specimen to be removed at high ratio of 92% or more. In addition, NDDC 1030 is consisted of high capability Peltier heat conductor in double to operate the moisture removal for 24 hours consecutively at a high flux level up to approximately 5000 mL/min.

Major characteristics
  • Install and use on the NDIR multi-gas instrument for TMS chimney
  • Extremely low temperature environment of 30 degree below the freezing temperature
  • Applying Mpemba effects
  • 92% or more of high moisture removal ratio
  • Minimize the loss of chimney discharge gas to be measured
  • Structure available to load on the size of 19-inch standard rack
  • Auto discharge system of the moisture captured in the specimen (not necessary for drainage pump)
  • Structure in double with high capability Peliter heat conductor
  • Product for long period by facilitating the Peltier heat conductor of high efficiency and fine durability
  • Realizing stable product capability while in operation
Specification
Paramenter Unit CO SO2
Accuracy (F.S.) % < 2 < 2
Zero drift 24h (F.S.) % < 2 < 2
Span drift 24h (F.S.) % < 2 < 2
Linearity (F.S.) % < 5 < 5
Detection limit ppm ≤ 1 ≤ 1
Response time min ≤ 2 ≤ 2
Operation temp. °C 0 ~ 50 0 ~ 50
Power W 550 550

Moisture remover for atmosphere

NSD-P200

NSDP 2002 is the pre-processing equipment for moisture removal used by installing on the odor measurement instrument for atmosphere. The odor ingredient that causes unpleasant feeling to the human body is scattered at very low density in the atmosphere that removal of moisture is extremely important in the instrumentation process. The moisture that is mixed together in the atmosphere specimen works as a factor to decline the precision of the instrument by provoking the interference effect in the process. The special design structure that applied the MpEMbA effects and drastic cooling into the extremely cold environment of minus 30 degree helps removing the moisture in the specimen to be removed at high ratio of 99% or more.

Major characteristics
  • Install and use on the odor measurement instrument of the atmospheric meter
  • Extremely low temperatured environment of 30 degree below the freezing temperature
  • Applying Mpemba effects
  • 99% or more of high moisture removal ratio
  • Minimize the loss of odor to be measured by using the specially processed flux plate
  • Low consumption power when structuring the product
  • Automatic elimination system of moisture trapped in sample
  • Peltier with high efficiency and good durability Peltier elements are used for long-term product stability
Specification
Paramenter Unit Value
Flow rate mL/min 200 ~ 1,000
Dew point °C -30
Humidity range g/m3 0 ~ 150
Removal efficiency % > 95
Operation temp. °C 10 ~ 45
Power W 500
▲
TOP